Saturday, November 21, 2009

DIY Tutorial for framing works on paper using an invisible V-Hinge

Here is a simple and affordable DIY tutorial that anyone can do!
For this tutorial I will be framing a 4" x 6" inch Print. 

Here are the materials you will need:

1. 11" x 14" or larger sized ready-made frame with 5" x 7" mat opening.  (Mat should be acid-free).
2. Acid-Free Mat board for mounting work if not included with Frame.
3. Exacto or utility knife
4. Gummed Linen Hinging Tape (Acid-Free)
5. Ruler or straight-edge.
6. Pencil.
7. Scissors.
8. Cardboard or cutting mat to protect cutting surface.

STEP 1:  
If the ready-made 11" x 14" frame does not include a mounting board, then cut a piece of mat board to the same size with a utility knife and a ruler. Remember to protect the cutting surface.


Then take the acid-free mat board and place it facing up on top of the mounting board.

Take your 4" x 6" inch print or photograph and center in inside the 5" x 7" mat opening like so.

STEP 4:  
With a pencil lightly mark the top left and top right corners on the mounting board.



STEP 5: 
Place the mat board in a safe area for now.  Then take the 4" x 6" image and turn it upside down facing you and align along the pencil marks so it is straight and parallel to the top and bottom of the mounting board.

Then flip the image so the backside is facing you. 

Cut a 6 inch piece of Gummed Linen Hinging Tape and measure two 1" inch marks on the backside with the pencil.

STEP 7: 
Cut along the pencil marks to get two 1" inch Squares of tape. Then, with scissors cut each of the squares in half so you have 4 pieces of tape.

Apply a little water to the gummed side of the linen tape and wait until it gets sticky.  Then apply two pieces vertically 1/2 inch from the corners of the image, about 1/3 of the tape on the image and the rest on the mounting board. This attaches the image to the mounting board.

Then to reinforce the hinge apply the other two pieces of tape horizontally across the vertical pieces aligned with the edge of the image.

This creates a 2 standard T-Hinges, but since this hinge will be invisible when the image is folded over it is known as a V-Hinge.

Erase any visible pencil marks with a kneaded eraser and then flip the image towards you and fold over the V-hinges.


STEP 10:
Image is shown V-hinged to the mounting board.

STEP 11: 
Then flip the mat board on its backside and place it adjacent to the mounting board like so. Cut the remaining gummed linen tape in 2 pieces and attach the mat board to the mounting board creating a hinge.  

STEP 12: 

Fold the mat board over on top of the mounting board. Your work is ready to be inserted into the frame!

STEP 13: 
Before you insert the mat board into the frame make sure that the glass is smudge and debris free. Clean the glass with a damp cloth and a little Windex and let it dry for a few minutes. Then place inside the frame and hang. Voila! That wasn't too bad.

I like this method of framing work because you can use affordable ready-made-frames and it allows the edges of the work to show.

This is useful if you have a work with small margins or you don't want a portion of the image to be hidden behind a traditional beveled mat. It also allows you to display work without the need to own a professional mat cutter to make beveled mats.

[If you want to use the traditional method which hides the T-Hinge behind the mat board, just follow the steps to create a T-Hinge, but don't turn and flip the image upside down  in STEP 5. ]


Gummed linen hinging tape is a safe, water reversible, acid-free tape with a water activated adhesive.  The adhesive dries strong and will not warp.

This is the gummed tape I used for this tutorial.

Your local Arts & Craft Store, Photography Stores, or Office Supply Store might carry this item. 

I hope that helps. If you have any other questions don't hesitate to ask. I hope you have enjoyed this tutorial and you find it helpful. Thanks for visiting!

Saturday, November 14, 2009

Yoga Asana Series

My latest digital artwork is a series of Yoga Asana or (Yoga Postures) now available from my Etsy store as Limited Edition ACEO Prints, Bookmarks, and Wearable Art Pendants


I've always admired dance, sports, acrobats, and the human body in various postures and states - not only because of the endless possibilities that it allows to play with form, but also because the figure is so able to translate energy and inner states of being. So naturally, while watching my wife practice her daily Yoga routine I took some pictures with my digital camera and thought how best i could capture this beautiful and dynamic form of exercise.

I hope each Yoga Asana piece can serve as a good luck charm for a more wholesome and integrated life. 

The circular designs are based on the idea of the Mandala. Mandala in 'Sanskrit' can be translated as "completion" and represents wholeness and how we are connected to the environment that surrounds us. In addition, the circles inside some of the figures suggest energy centers or "chakras" that run along the spine. I also used symbolic color harmonies to match the title of each piece.

To see the complete Yoga Asana series please visit my online studio at:

Saturday, November 7, 2009

Diptych Series "Inner Dualities"

This is a 2.5” x 3.5” inch Limited Edition ACEO Print from a Series of 10 Diptychs (Double-paneled oil paintings) titled “Inner Dualities”.

This is the third diptych in the series titled “Sacrifice & Hope”.

They are based on the idea that the essence of human life consists of opposite forces and inner states of being that need to be united within the human soul to move towards individual wholeness.

The subject matter in these pieces is mostly inspired by the human form, and include art history, portraiture, still life, nature, ordinary objects, and personal symbols. In addition, these diptychs use symbolic color and shapes.

To see all 10 Diptychs and learn more about them please click HERE.

Thanks for visiting!